Maintenance of Hardware:
The internal workings of locks, handles, catches etc. should be kept in good working order by applying a light spray of lubricant similar to WD40 or similar into the area(s) of any moving parts.
The external finish of all hardware must be kept clean by removing any harmful residue, especially salt spray, from the surface using a non-abrasive cleaning agent and wiped down with a soft cloth moistened with WD40 or RP7.
When maintaining either internal or external hardware, ensure that all finished surfaces (ex. timber, aluminum etc.) in close proximity are well protected from exposure to any cleaning or lubricating agents.
All tracks and sills must be kept clear of dirt, debris and other matter which can cause damage to, and restrict the proper functioning of rollers, guides and drop bolts.
Frequency of Cleaning:
Cleaning required is dependent on the severity of the environment. The following time periods represent a guide only.
Rural / Suburban Environments
The maximum period between cleaning should never be more than six (6) months.
Coastal / Pool / Industrial Environments
More frequent cleaning is necessary here with the maximum period between cleaning being no more than three (3) months.
Under the worst conditions involving heavy grime deposition and atmospheric pollution (e.g. sulphur compounds or salts) monthly cleaning is advisable if deterioration is to be prevented.
Replacement parts and services
Condado Window stocks parts for all our window, doors and shutter systems. We also offer routine maintenance, repair work, and parts replacement services. Condado Window employs industry equipped service technicians; to guarantee that specialist service and maintenance back up is there if you require it. Our service technicians complete work under our written warranty or charged out service calls - including repair and/or replacement of hardware (ex. operators, handles etc.) and/or aluminum components (ex. slats, housing, framing, tracks, etc).